Device atomizer. The tank comes in different size, shapes

Device anatomy: E-cig and Its
Components

A
large number of e-cigarettes are available in the market today. These vaping
devices have different colors, shapes and sizes. Although these e-cigs are not
the same in visual look but they have similar parts. Being a vaper it is
important for you to understand the anatomy of e-cigarette so that you could
choose the right device and take good care of it. A simple vape device consists
of three main components.

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!


order now

1. The Tank

It
holds the e-juice and provides connection with the mod. It is typically
combined with the atomizer. The tank comes in different size, shapes and
colors. These cartridges or tanks can be used many times but you have to clean
the tank properly whenever you change the flavor of e-juice otherwise it is
suggested to replace the tank.

2. The Atomizer

It
is the mid part of a vaping device that holds the tank and it is attached with
battery on the other side. It has a heating element known as coil which heats
up immediately right after the device is activated. The coil is used for
vaporizing the e-juice. It converts the e-juice into vapor.

a.     
How
to prime your vape coil?

Priming a vape coil is a technique used to make sure
that cotton inside the coil is completely soaked. This dampness will keep the
wick safe from burning and overheating. Always follow the rule out with the old, in with the new.
First of all remove the old coil and screw the new one. This will increase the
griping for further usage. It also avoids e-juice from dropping on your hands.
For priming a coil simply follow these steps:

 

                               
i.           
Soak
the wicking material. On the top of coil’s head look for the
juice hole. Take the bottle of e-liquid and add drop of vape juice in each and
every hole to saturate the wick. Saturate the cotton with the e-juice. For
soaking the center of wick, add another drop in the hole. However, do not over-saturate
the wick so that e-juice could not rush inside your mouth and also to avoid
flooding.

                             
ii.           
Taking
dry hits. When you’ve filled the device properly, reassemble
the tank first and then re-attach to the battery. Before triggering the ignition
button of device battery, take some dry hits. Doing this will transfer the vape
juice into the cotton of wick.

                           
iii.           
Break
in the coil. When it comes to prime the coil, the
most significant aspect is to soak the wick. Now it’s important to break in the
new wire. After heating up the wire expands and contracts after cooling down so
it’s better to break the wire slowly. For this purpose you should use new coil
from lower wattage to normal. After few hits you should slowly increase the
wattage to normal. Doing this will ensure your coil is properly primed with
cotton.

 

b.     
When
you should change vape coil

Changing the coil is necessary after some time not
to get burnt or dry taste. Coil has a great influence on the flavor so to get a
better flavor you need to change the coil. There is nothing to tell about the
cleaning of coil, just avoid wetting the coil. The coil will burn out if you
wet it. The symptoms which tells us about the need of changing the coil are

·        
When the vape coil or wick has burned
out.

·        
The e-juice flavor changes and you
experience burnt taste.

·        
The vapor output decrease.

·        
Leakage issue.

 

c.      
Changing
the vape coil

Replacement of vape coil is easy and takes few
minutes, but there are different types of vape devices in the market. To change
the coil you have to follow these simple steps that fit for all vape devices.

·        
Separate the tank from the device.

·        
Clean the tank and remove the e-juice.

·        
Unscrew the old coil from the tank.

·        
Screw in the new coil.

·        
Put the tank back.

3. The Battery

The
rechargeable lithium battery powers the device and supplies charge to atomizer
which in turn heats up. Battery is the main source to generate power so always
use the battery carefully. Don’t use a damaged battery and keep in mind the
safety precautions of using a battery. Always put the batteries in a right way
if you put it wrongly the pins may get damaged. Each time you carry any spare
batteries, keep them in a proper case because battery case will protect the
wrapping of battery. If the wrapping is damaged the battery will be unsafe for
using.

Temperature
is important element for handling the battery. Keep the battery in modest temperature
from 10 to 40 degree Celsius. If the battery gets warm remove it and let it to
be cool down then use it again.

Another
important element for your battery is charger. Always use the correct charger
for your battery and a proper wall plug adopter. Changing multiple chargers and
adopter for your battery may damage the battery, your battery get swollen and
sometimes get burst. If you keep changing the charger and adopter the battery
will be overloaded and will be damaged soon.

Take care of your charging device

Make
sure that you use your equipment within its limit and capacity, so be sure what
you are doing. Keep in mind the safety precautions and study Ohm’s law of
vaping.

Properly
charge you battery. Do not leave your battery unattended. Overcharging battery
for long time or charging the battery when it’s completely flat will reduce the
strength of battery. Use a quality charger for battery and avoid battery to get
completely flat or overcharged.

Charge
your battery at a lowest rate. Cool down your battery after using then charge
it and inversely after charging cool down the battery before using it.

Handling
tank screws and thread

Proper
handling of your tank screws and thread is necessary for their long lasting
life. For this purpose you have to handle it with care especially when you open
or close the tank or when you attach tank mod with new kit. Read the
instructions carefully before using any equipment.  Attach the tank with soft hand, over
tightening and keeping screw too loose can damage the tank. If the screw is too
tight then it will not be able to use for a while and too loose will increase
the risk of scratching and leading to other problems.

Everything
needs proper care and maintenance. Maintenance is the key for long lasting
usage of your vape device. For proper maintenance cleanliness is also necessary
so to enjoy maximum flavor on every hit, always keep your vape device clean.

I
hope after understanding the anatomy of e-cigarette and getting tips to take care
of your device you can find the right e-cigarette of your choice and enjoy
vaping.